hanseatic VC-T4020E-1 Gebrauchsanleitung Seite 57

If odours cannot be removed by
cleaning or the hygiene filter is too
heavily soiled, it must be replaced.
1. Pull the mains plug (13) out of
the socket.
(1)
(15)
2. Press the unlocking but-
ton (15) for the dust bin (4) and
lift the dust bin (4) upwards by
the carrying handle (1) to re-
move it from the appliance.
3. Pull the locking button (36) to-
wards you and lift the dust bin
lid (2) upwards by the carrying
handle (1).
Cleaning/changing the filter Page EN-23
(4)
4. Pull the hygiene filter (37) out
of the "lug" (39) on top.
5. Pull the foam filter (38) out as
well, and tap both filters out
over a waste bin.
6. If very dirty, clean the hygiene
filter (37) with clear water
(max. 40 °C) or clean it with
compressed air. Never use
detergent or washing-up liquid
(1)
to clean the hygiene filter (37).
Clean the foam filter (38) if
necessary.
(2)
7. Let the hygiene filter (37) dry
completely (at least 24 hours).
(36)
8. Reinsert the foam filter (38)
and the hygiene filter (37) and
again close the dust bin lid (2).
9. Reinsert the dust bin (4) into
the vacuum cleaner.
The article number for re-or-
dering hygiene filter is listed
in Chapter "Service" on
page EN-31.
(39)
(37)
(38)
.