Start-Up; Removing Nozzles; Setting Up The Appliance En - hanseatic PREMIUM LINE VCB46A15F-70 Gebrauchsanleitung

Page EN-14

Start-up

Start-up

Removing nozzles

The crevice nozzle (18) and the
furniture brush (19) can be found
in the storage compartment (3).
1. Press the PUSH release but-
ton (4) to open the storage
compartment for the crevice
nozzle and the furniture brush.
2. Pivot the lid upwards until it
locks into place.
3. Remove the desired nozzle.
4. Close the storage compart-
ment by pressing the lid shut.
Setting up the
appliance
(4)
1. Connect the suction hose (15)
and the telescopic tube (16).
2. There are two lugs on the con-
nector piece (24) on the other
end of the suction hose.
Put the connector piece into the
opening (5) of the suction hose
connector. To do this, guide the
two lugs into the recesses in
the opening of the suction hose
connector.
3. Screw-in the connector piece
by rotating clockwise.
(15)
(16)
(24)
(5)