Cleaning The Vacuum Cleaner; Cleaning The Universal Floor Nozzle - hanseatic VC-T4020E-1 Gebrauchsanleitung

Page EN-26

Cleaning the vacuum cleaner

Cleaning the vacuum cleaner
WARNING
Risk of electric shock!
Improper use of the appli-
ance may lead to serious inju-
ry or death.
■ Before cleaning the appli-
ance, pull the mains plug
out of the socket.
■ Ensure that no water seeps
into the appliance.
■ Never immerse the appli-
ance in water.
■ Only insert the mains plug
into the socket if all appli-
ance components are com-
pletely dry.
NOTICE
Risk of damage!
Improper cleaning of the ap-
pliance can impair the surface.
■ Do not use any abrasive
cleaners to clean the appli-
ance (e.g. scouring or thin-
ning agents).
1. Wipe
– the housing,
– the storage compartment for
the crevice and upholstery
nozzle,
– the inside of the air vent (7)
– the accessories
with a damp cloth as required.
Never allow liquid to penetrate
the vacuum.
2. Occasionally clean the air
vent (7) with a soft brush.
Cleaning the universal
floor nozzle
• Vacuum the underside of the
universal floor nozzle (18) now
and again with the crevice noz-
zle (22).