Start-Up; Unpacking The Appliance En; Setting Up The Appliance En - hanseatic VCB35B15C-1J7W-70 Gebrauchsanleitung

Page EN-14

Start-up

Start-up
Unpacking the
appliance
NOTICE
Risk of damage!
Improper handling of the ap-
pliance may result in damage.
■ Do not use sharp objects to
unpack the appliance.
1. Unpack the appliance.
2. Carefully remove all parts of
the packaging, plastic profiles,
tape and foam padding.
Setting up the
appliance
(15)
(16)
1. Connect the suction hose (15)
and the telescopic tube (16).
2. There are two nibs on the con-
nector piece (22) on the other
end of the suction hose.
Insert the connector piece into
the opening of the suction hose
connector (5). To do this, guide
the two nibs into the recesses in
the opening of the suction hose
connector.
3. Screw-in the connector piece
by turning it clockwise.
(16)
(17)
4. Select the desired nozzle, e.g.
the floor nozzle (17), and insert
it into the telescopic tube.
You can also insert all nozzles
directly into the telescopic tube
handle located on the suction
hose.
(22)
(5)