hanseatic VC-T4020E-1 Gebrauchsanleitung Seite 63

Problem
Appliance
switches itself
off.
Troubleshooting table Page EN-29
Possible cause
Brush/nozzle
blocked.
Motor protection
filter blocked.
Overheat
protection has
been activated.
Telescopic tube
/ suction hose is
blocked.
Solutions, tips
Press the On-Off foot switch/
suction force control unit,
disconnect the mains plug
from the socket, clean the
brush/nozzle.
Press the On-Off foot switch/
suction force control unit,
disconnect the mains plug
from the socket, allow the
appliance to cool down for at
least 30 minutes and clean the
motor protection filter.
Press the On-Off foot switch/
suction force control unit,
disconnect the mains plug,
check the telescopic tube and
suction hose for blockage and
clean if necessary.