Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Page EN-22
Additional functions
Additional functions
Adjusting your program
You can select additional functions to improve
the washing results. Depending on the cycle,
you can select several settings.
• Prepare your washing machine as normal:
Load laundry and detergent, open tap,
switch on washing machine and set the
desired cycle.
Temperature selection
Depending on the cycle, you can set the tem-
perature to cold, 20 °C, 30 °C, 40 °C, 60 °C
or 90 °C.
• Press the "Temperature selection" but-
ton (3) repeatedly until the desired temper-
ature is displayed.
Spin
Depending on the cycle, you can set the spin
speed to 0, 600, 800, 1000, 1200 or 1400 rpm.
• Press the "RPM" button (11) repeatedly
until the desired spin speed is displayed.
Extra rinse
"Extra rinse" is recommended for sensitive
skin. The appliance will wash with more water
and include an additional rinse cycle.
• Press the "Extra rinse" button (7).
Pre-wash
"Pre-wash" is recommended for heavily soiled
laundry.
If you select a cycle with pre-wash, fill deter-
gent compartment I with ¼ of the detergent
and fill detergent compartment II with ¾ of the
detergent.
• Press the "Pre-wash" button (10).
Time saving
You can reduce the cycle time with the op-
tion "Time saving". This is possible with the
six blue-marked cycles and can be a sensible
option for slightly soiled laundry.
1. Select one of the blue-marked cycles us-
ing the cycle selector (2).
2. Press the "Time saving" button (6).
The reduced cycle time and the
will be shown on the display.
Start time pre-selection
The cycle usually starts as soon as you have
pressed the
button (9).
The appliance offers two ways to delay the
start of the cycle. The start time delay can be
set in one-hour increments. The maximum
start time pre-selection is 24 hours.
1. Prepare your washing machine as normal:
Load laundry and detergent, open tap,
switch on washing machine and set the
desired cycle.
(2)
(4)
Startzeit-
2. Select the desired cycle using the cycle
selector (2).
3. Press the "Start time pre-selection" but-
ton (4).
On the display (5) the
1H
nate and
will be shown.
4. Press the "Start time pre-selection" button
repeatedly until the desired start delay
time is set.
You can delay the start time by 1 to 24 hours.
5. Press the
button (9).
The
symbol will now illuminate contin-
uously.
The cycle will start automatically after the
set start delay period has finished.
( )
symbol
(5)
3 Sek. drücken für Individuell
(8)
Zeit sparen
Ein/Aus
Extra
(9)
Spülen
Vorwäsche
Start/Pause
3 Sek.
Tür Entriegelung
symbol will illumi-
Quicklinks ausblenden:
Werbung
Kapitel
Inhaltsverzeichnis
