Set-Up And Connection; Transport; Removing/Installing Transport Safety Devices - hanseatic HWMB814C Gebrauchsanleitung

Page EN-32

Set-up and connection

Set-up and connection
Any residual water or water drops pres-
ent in the machine are merely a sign
that the appliance was tested for functionality
during production.

Transport

CAUTION!
Risk of injury!
Improper handling of the appliance
may result in injury.
■ The appliance is very heavy. Never
transport or carry it alone, rather al-
ways with at least two persons.
NOTICE
Risk of damage!
Improper handling of the appliance
may result in damage.
■ If a trolley is used to move the ap-
pliance, always lift the appliance as
shown on the packaging.
■ Always transport the appliance verti-
cally.
■ Only transport the appliance with
built-in transport safety devices.
• Check whether the paths of transport and
the installation location are suitable for the
weight of the appliance. If in doubt, ask
your landlord or property management.
Removing/installing transport
safety devices
WARNING!
Risk of electric shock!
Touching live parts may result in severe
injury or death.
■ Make sure the appliance is not
connected to the power supply whilst
the transport safety devices are being
removed or installed.
NOTICE
Risk of damage!
Improper installation and set-up of the
appliance may result in damage.
■ Remove all transport safety devices
prior to installation.
Removing the transport safety
devices
1. Loosen the screws of the 4 transport safe-
ty devices (15) using a 10 mm wrench.
(15)