Fire Hazard; Carry Out A Test Run - hanseatic HWMB814C Gebrauchsanleitung

Page EN-36 Set-up and connection
CAUTION!

Fire hazard!

Improper handling of the appliance
can lead to fi re and property damage.
■ Only connect the appliance to a pro-
perly installed and earthed electric
socket. Do not connect to a multi-so-
cket extension cable or a multi-socket
plug.
• Plug the mains plug into a properly in-
stalled and earthed electric socket that
has been sufficiently secured (see "Tech-
nical specifications" on page EN-43).

Carry out a test run

Requirements
– Read chapter "Safety" from page EN-4 and
all the safety notices.
– The transport safety devices have been
removed and the appliance has been pre-
pared as described in chapter "Set-up and
connection" on page EN-32.
– The water inlet hose and water drain
hose have been properly fixed in place.
The appliance requires an initial wash cycle
without laundry, but with detergent. The aim
of this is to rinse out possible residues from
production.
1. Dispense a maximum of 25 ml of compact
detergent into the left chamber II.
2. Make sure that the drum is empty.
3. Push the loading door (19) tightly closed.
4. Carry on, as described in chapter "Wash-
ing process" on page EN-20; use the "Cot-
ton" cycle here.
First use is completed once the cycle has fin-
ished.