Pre-Wash/Extra Rinse; Custom" Cycle; Operation: Additional Functions; Start Time Preselection - hanseatic HTW612D Gebrauchsanleitung

Pre-wash/Extra rinse

Please note that these settings affect the cy-
cle's duration, as well as the water and ener-
gy consumption .
After selecting your preferred cycle, you can
add one or both functions to the cycle:
"Pre-wash"
This option is recommended only for
heavily soiled laundry (see "Adding
detergent/fabric-care products" on
page EN-19) .
"Extra rinse"
• To select an option, repeatedly tap the
"Function" button (9) until the LED for the
desired function(s) lights up .

Operation: Additional functions

Start time preselection

The cycle usually starts as soon as you have
pressed the button (10) . This appliance also
offers you the option to delay the start time .
Setting the start time preselection
The start time delay can be set in one-hour
increments . The maximum start time pre-se-
lection is 24 hours .
1 . Select the desired cycle using the cycle
selector (1) .
2 . Press the button "Start time preselec-
tion" (12) .
The LED (4) lights up; the display shows
the delay time , i .e . the selected cycle will
1 h
start in one hour .
Operation: Additional functions

"Custom" cycle

If you frequently use a standard cycle with
certain additional settings, you can skip this
combination .
1 . Select the standard cycle and the desired
cycle adjustments .
2 . Press and hold the "Temp/
for approx . 3 seconds .
You can now use the "Custom" cycle .
If you want to save a different combina-
tion of standard cycle and cycle adjust-
ments, repeat the process .
3 . To extend the delay time, repeatedly
press the "Start time preselection" (12)
button until the display shows the desired
delay time .
4 . Press the button (10) .
The cycle will start after the delay setting
has elapsed .
Terminate delay
If the button (10)
• has already been pressed:
switch the appliance off using the
button (9) .
• has not yet been pressed:
repeatedly press the "Start time preselec-
tion" button (12) until the display shows
The LED (4) goes out .
Page EN-23
" button (14)
0 h .