Notes On Safety; Symbols; Symbols On The Equipment - Parkside PKGA 20-Li C2 Originalbetriebsanleitung

Cutting­capacity
Wood .................................... 100 mm
Metal ...................................... 50 mm
Weight ......................................1.44­kg
Sound­pressure­level­
(L ) ................... 89.3­dB(A),­K
pA
Sound­power­level­
(L ) ............... 100.3­dB(A),­K
WA
Vibration­(a ),­Sawing
h
boards ..........12.395­m/s
wood beams .. 12.392­m/s
Motor unit with multifunction tool ... PKGA4
Oscillation­rate­(n
0
Oscillation angle ..............................3.0°
Weight ...........................................1­kg
Sound­pressure­level­
(L ) ................... 84.8­dB(A),­K
pA
Sound­power­level­
(L ) ................. 95.8­dB(A),­K
WA
Vibration­(a ) ......4.229m/s
h
Attention! An up­to­date list
of battery compatibility can
be found at:
www.lidl.de/akku
The stated vibration emission value was
measured in accordance with a standard
testing­procedure­and­may­be­used­to­com-
pare­one­power­tool­to­another.
The stated vibration emission value may
also­be­used­for­a­preliminary­exposure­
assessment.
Warning: The vibration emission
value may differ during actual use
of­the­power­tool­from­the­stated­
value­depending­on­the­manner­in­
which­the­power­tool­is­used.
­ Try­to­keep­the­exposure­to­vibra-
tions­as­low­as­possible.­Examples­
of measures to reduce vibration
exposure­are­the­wearing­of­gloves­
= 5 dB
pA
= 5 dB
WA
;­K=1.5­m/s
2
;­K=1.5­m/s
2
) ............0-20000­min
= 3 dB
pA
= 3 dB
WA
,­K=­1.5­m/s
2
when­using­the­tool­(except:­operat-
ing­mode­drilling)­and­limiting­the­
working­hours.­For­this­purpose­all­
parts­of­the­operating­cycle­have­to­
be­considered­(for­example,­times­
when the electric tool is switched
off and times when it is switched on
but­running­without­any­load).

Notes on Safety

2
2
This section details the basic safety instruc-
tions­for­working­with­the­appliance.
-1

Symbols

Symbols in the manual
Warning symbols with in­
formation on damage and
injury prevention.
2
Hazard symbol with infor­
mation on the prevention of
personal injury caused by
electric shock.
­ Instruction­symbols­with­information­
on­preventing­damage.
Wear safety gloves.
­ Wear­ear­protection.
­ Wear­a­protective­mask.
­ Help­symbols­with­information­on­
improving­tool­handling.

Symbols on the Equipment

Read through the instruction manual
carefully.
GB IE
29