Parkside PKGA 20-Li C2 Originalbetriebsanleitung Seite 32

GB IE
to operate the power tool. Power
tools are dangerous in the hands of
untrained users.
e) Look after the power tool and
application tool carefully. Check
for misalignment or binding
of moving parts, breakage of
parts and any other condition
that may affect the power tool's
operation. If damaged, have
the power tool repaired before
use.­Many­accidents­are­caused­by­
poorly­maintained­power­tools.­
f) Keep cutting tools sharp and
clean. Properly­maintained­cutting­
tools­with­sharp­cutting­edges­are­less­
Iikely­to­bind­and­are­easier­to­control.­
g) Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking
into account the working condi­
tions and the work to be per­
formed.­Use­of­the­power­tool­for­op-
erations different from those intended
could result in a hazardous situation.
h) Keep handles and grip surfaces
dry, clean and free from oil and
grease. Slippery­handles­and­grip­
surfaces­do­not­permit­safe­operation­
and­control­over­the­power­tool­in­un-
expected­situations.
5) CAREFUL HANDLING AND USE
OF BATTERY DEVICES
a) Charge the batteries only in
chargers that are recommended
by the manufacturer. Risk­of­fire­if­a­
charger­that­is­suitable­for­a­specific­type­
of battery is used with other batteries.
b) In the power tools, use only the
batteries designed for the pur­
pose. The use of other batteries may
result­in­injuries­and­risk­of­fire.
32
c) Keep the unused battery away
from paper clips, coins, keys,
nails, screws and other small
metal objects, which could
cause bridging of the contacts.
A short circuit between the battery con-
tacts­may­cause­burns­or­fire.
d) If used incorrectly, liquid may
leak from the battery. Avoid
contact with this. In the event of
accidental contact, rinse off with
water.­If­the­liquid­gets­into­eyes,­seek­
medical­assistance.­Leaking­battery­
fluid­may­cause­skin­irritations­or­burns.
e) Do not use damaged or altered
batteries. Damaged or altered bat-
teries­can­be­unpredictable­and­lead­
to­fire,­explosion­or­risk­of­injury.
f) Do not expose batteries to fire
or elevated temperatures. Fire or
temperatures­over­130 °C­can­cause­
an­explosion.
g) Follow all instructions for charg­
ing and never charge the bat­
tery or the battery­powered
tool outside the temperature
range stated in the operating
instructions. Incorrect­charging­or­
charging­outside­the­permitted­tem-
perature­range­may­destroy­the­battery­
and­increase­the­risk­of­fire.
6) SERVICE
a) Have your power tool serviced
by a qualified repair person us­
ing only identical replacement
parts. This will ensure that the safety
of­the­power­tool­is­maintained.
b) Never repair damaged batter­
ies. All­battery­repairs­should­be­car-
ried out by the manufacturer or author-
ised customer service centres only.