AsViva E3 Benutzerhandbuch Seite 71

TROUBLESHOOTING
Issue
No display.
No speed display.
No hand pulse signal or wrong
hand pulse signal.
The handbar moves / shaking.
Noise generated by moving
parts.
No resistance adjustment pos-
sible / no resistance noticeable.
In case of malfunctions, please remove the batteries and the AC adapter for a few seconds.
If the fault persists, please contact our service department.
If you have any questions about your fitness equipment, our employees at the
Service department will be happy to continue.
Possible cause
Fault in the electric circuit.
Computer without function.
Der Computer erhält kein Signal
vom Geschwindigkeitssensor
Sensor is faulty.
Computer is faulty.
The computer does not receive
a pulse signal.
The computer receives a weak
or periodically occurring pulse
signal.
Screws have come loose.
Incorrect assembly.
Magnetic series.
Mechanism damaged.
The belt has comeoff.
Solution
Check if the power connection is
guaranteed.
Replace the computer.
Refer to the installation inst-
ructions and check all cable
connections.
Consult the service department.
Prüfen Sie die Handpulssensor-
leitungsstecker zum Computer.
The hand pulse sensors or pul-
se receivers will not work if your
skin is extremely dry. Moisten
your hands with a little water
and try again.
Clean the hand pulse sensors or
pulse receivers to ensure good
contact between your body and
the pulse sensors.
Check all screws for tightness.
Remove the covering and ensu-
re the correct assembly of the
moving parts.
Remove the cover and check
the magnetic series.
Remove the cover and check.
Remove the cover and check.
71