ASSEMBLY
Step 6
A total of four hexagonal screws M8*45 (74) and four M8 nuts with screw securing (7) must be instal-
led. They are attached to the left and right crankshaft (72), (73) as a insurance.
•
Insert one pipe cover (75) into the left and right crankshaft (72), (73).
•
Take the left crank tube (72) and insert it into the round tube of the left crank tube assembly / hand
crank bushing (78).
For the mounting you need:
2x hexagonal screws M8*45 (74)
2x M8 nuts (7) (Look at the direction of the screw head. )
•
Then put the pipe cover (75) on it.
Follow the same steps with the right crank tube (73).
52