AsViva E3 Benutzerhandbuch Seite 49

ASSEMBLY
Step 2
The main frame group (1) is upholstered with packaging material (A).
Remove the packaging material from the main frame group.
• Note the picture!
Screws (33) and discs (34) are attached to the connecting tube assembly of the front footpaths
(right and left).
• Insert the right foot connection tube (3) into the square tube of the main frame group (1).
For the editing you need:
3x hexagonal screws M8*20 (33)
8x elastic seals (34)
Follow the same steps with the left foot connection tube (2).
• Cover the square tube at the front end of the main frame group (1) with the front covering device
(40).
For the editing you need:
2x 4,1*19 cross-slit screws (21)
49