Operation - Cameo CLPFLATPRO7G2 Bedienungsanleitung

STAND AND MOUNTING BRACKET
9
Four rubber feet on the underside of the stand and/or mounting bracket ensure that it can be se-
curely placed on suitable surfaces while at the same time protecting the surface from scratches.
When installing the traverse mounting, use an optional traverse clamp (Omega bracket and the 16
mm spigot SPIN16® with folding mechanism are available as options).
CARRY HANDLE/SECURING POINT
10
The practical carry handle also serves to secure the spotlight in the event of traverse mounting.
GRIP SCREWS
11
The two grip screws are used for adjusting and fixing the stand and/or mounting bracket.
PLEASE NOTE: To protect the input and output sockets from splash water in accordance with
IP65 protection class, they must be correctly closed using the appropriate IP65 plugs or the rubber
sealing caps must be used to close them.

OPERATION

PLEASE NOTE
X As soon as the spotlight is correctly connected to the power supply, the following will be
displayed in succession: "Welcome to Cameo", the model name and the software version. After
this process, the spotlight is ready for operation and the previously activated operating mode is
launched.
X To return directly from the submenus to the main display, press and hold the MENU control
for around 3 seconds. The main display is activated automatically if no input is made within
approximately 30 seconds. To navigate one level up in the submenus, briefly press MENU.
X To directly access the previously edited menu item, briefly press MENU and ENTER at the same
time.
X Briefly pressing UP when in the main display rotates the display by 180°.
X To quickly change a value, such as the DMX start address, press and hold UP or DOWN.
X Before changing device settings, ensure that the control panel is dry and dust free, in order not
to impair its functionality.
MAIN DISPLAY DMX OPERATING MODE
The display shows the DMX address and current DMX start address (in the example 001). If the
DMX delay is activated, the delay group and delay time are also displayed.
12