Cameo CLPFLATPRO7G2 Bedienungsanleitung Seite 17

COLOR PRESET STANDALONE MODE
15 different color presets are available. The brightness can be separately set for each preset.
Starting from main display 1, press MENU to enter the main menu. Using UP and DOWN, select
the menu item Standalone and confirm with ENTER. Using UP and DOWN, select the standalone
mode Color Preset and confirm with ENTER. Now use UP and DOWN to select the desired color
as a preset and confirm with ENTER (Color Off = blackout). You can set the desired brightness
from 000 to 100 using UP and DOWN, confirm all entries with ENTER.
USER COLOR STANDALONE MODE
The User Color standalone mode allows you to store four individual color presets for overall bri-
ghtness, strobe and a color blend of R, G, B, W and A directly in the device.
Starting from the main display, press MENU to enter the main menu. Using UP and DOWN, select
the menu item Standalone and confirm with ENTER. Again use UP and DOWN to select the stan-
dalone mode User Color and confirm with ENTER. Using UP and DOWN, now select the desired
preset (Color 1 - Color 4) and confirm with ENTER. Using UP and DOWN, now select the menu
item that you wish to edit and confirm with ENTER. You can use UP and DOWN to configure the
desired value between 000 and 255. The strobe effect values correspond to those in channel 2 of
the DMX table 4 CH Mode 1. Confirm all entries with ENTER.
17