Set-Up And Installation - Cameo CLPFLATPRO7G2 Bedienungsanleitung

SET-UP AND INSTALLATION

Four rubber feet on the underside of the stand and/or mounting bracket ensure that it can be se-
curely placed on suitable surfaces while at the same time protecting the surface from scratches.
When installing the traverse mounting, use an optional traverse clamp to be fastened at the
mounting point (Omega bracket and the 16 mm spigot SPIN16® with folding mechanism are
A
available as options). Ensure firm connections and secure the spotlight with a suitable safety rope
at the securing point provided
Important safety notice: Overhead mounting requires extensive experience, inclu-
ding the calculation of the limit values for load, the installation materials and regular
safety inspection of all installation materials and spotlights. If you do not have these
qualifications, do not attempt to perform an installation yourself. Refer instead to a
qualified professional. There is a risk that devices that are incorrectly mounted and
secured may come loose and fall down. This can cause serious injury or death.
24
(carry handle).
B
B
A