Cameo CLPFLATPRO7G2 Bedienungsanleitung Seite 20

SYSTEM SETTINGS (SETTINGS)
Starting from the main display, press MENU to enter the main menu. Use UP and DOWN to select
the menu item Settings and confirm
with ENTER.
This will take you to the submenu for setting the submenu items (see table, select with UP and
DOWN, confirm with ENTER, change value or status with UP and DOWN, confirm with ENTER).
Settings
Display Reverse
Display backlight = Display lighting
Signal Fail
PWM Frequency
Dimmer respon-
se
20
= Rotate display
= Operating status with
DMX signal fault
= LED PWM frequency
= Dimmer response
Off No display rotation
On Display is rotated by
180° (e.g. for overhead
installation)
Off Deactivates after approxi-
mately 30 seconds of
inactivity
On On permanently
Hold Last command is retained
Blackout Activates blackout
Fade slow fade out to blackout
User Color 1 User Color 1 is activated
650Hz, 1530Hz, Select LED PWM frequ-
2000Hz, ency
3600Hz, 12kHz,
25kHz
LED Lamp responds abruptly to
changes in DMX value
Halogen Spotlight behaves like a
halogen spotlight with soft
brightness changes