Inhaltsverzeichnis
Werbung
Funktionsweise
Der Aufruf von MPCCOM.EXE –h erzeugt folgende Ausgabe:
MPCCOM -d time0
MPCCOM -h
MPCCOM -info, -i
MPCCOM -p value
MPCCOM -t time1 time2 ...set timer values in sec
MPCCOM -x value
MPCCOM -kb value
MPCCOM -kl value
MPCCOM -kp value
MPCCOM -ks value
DLoG IPC 7/215
set power-key time
(time0=time to wait before key press is
recognized in 100ms
valid values [1..255])
show this help
readout a lot of info stored in EEPROM
set power-key mode
(0=power-key completely disabled
1=wait for the power-key to startup &
use the power-key to switch off the
device
2=ignore the power-key at startup & use
the power-key to switch off the device
3=wait for the power-key to startup &
ignore the power-key on the working
device
(valid values [1..65535])
(time1 = delay time,
time2 = switchoff time)
.. .set ignition monitoring
when device is working
(0=use ignition for automatic
switch-off
1=ignore ignition if device
is working)
...disable backlight key
(0=no, 1=yes)
...disable "+" & "-" keys
(0=no, 1=yes)
...disable power key
(0=no, 1=yes)
...disable shift key
(0=no, 1=yes)
Handbuch
Software-Applikationen
81
Werbung
Inhaltsverzeichnis
