Examples Of Cooking Applications - AEG IAE84881IB Benutzerinformation

• For both safety reasons and optimal
cooking results, do not use cookware
larger than indicated in "Cooking zones
specification". Avoid keeping cookware
close to the control panel during the
cooking session. This might impact the
functioning of the control panel or
accidentally activate hob functions.
Refer to "Technical data".
7.2 Correct pans for Pan Fry
function
Use only pans with flat bottom. To check if
the pan is correct:
1. Put your pan upside down.
2. Put a ruler on the bottom of the pan.
3. Try to put a coin of 1, 2 or 5 Euro Cent
(or with similar thickness) between the
ruler and the bottom of the pan.
a. The pan is incorrect if you can put the
coin between the ruler and the pan.
b. The pan is correct if you cannot put
the coin between the ruler and the
pan.
7.3 The noises during operation
If you can hear:
• crack noise: cookware is made of different
materials (a sandwich construction).
• whistle sound: you use a cooking zone
with a high power level and the cookware
is made of different materials (a sandwich
construction).
• humming: you use a high power level.
• clicking: electric switching occurs, the pot
is detected after you place it on the hob.
• hissing, buzzing: the fan operates.
The noises are normal and do not indicate
any malfunction.
7.4 Öko Timer (Eco Timer)
To save energy, the heater of the cooking
zone deactivates before the count down
timer sounds. The difference in the operation
time depends on the heat setting level and
the length of the cooking operation.
7.5 Examples of cooking
applications
The correlation between the heat setting of a
zone and its consumption of power is not
linear. When you increase the heat setting, it
is not proportional to the increase of the
consumption of power. It means that a
cooking zone with the medium heat setting
uses less than a half of its power.
The data in the table is for
guidance only.
ENGLISH 21