urmet 1092/602 Bedienungsanleitung Seite 81

10.5.8.5 Masking zone
It allows to hide from the operator certain parts of the images captured and displayed on the monitor.
Select MASKING ZONE and press OPEN to access the following submenu:
Option
Number
Mask Edit
Mask Display
MASK EDIT
Select and press MASK EDIT to display on the monitor the masking zone previously selected with Number.
Use the arrow buttons to move the zone in the desired position.
Use the buttons TELE and WIDE to change the zone horizontal dimensions.
Use the buttons NEAR and FAR to change the zone vertical dimensions.
REMARKS OF PRIVACY ZONE
•
It is suggested to use privacy zones slightly larger than the area to be masked.
•
Privacy zones can only be rectangular.
10.5.8.6 Motion – automatic operations
Select MOTION and press OPEN to access the following submenu:
DS1092-090
>1 Number
2 Mask Edit
3 Mask Display
IRIS CLOSE to Exit
Value
1 ÷ 4
/
ON/OFF
>1 Park Action
2 Power On Action
3 Limit Operation
IRIS CLOSE to Exit
Masking Zone
1
OFF
Description
This option allows to select the four available
masking zones.
This option allows to define dimensions and
position of the masking zone (see below).
If enabled (ON), this option allows to activate
the function by displaying on the monitor the
masking zone.
MOTION
81