urmet 1092/602 Bedienungsanleitung Seite 72

IRIS
Select IRIS and choose between MANUAL and AUTO (automatic) options.
Select MANUAL and press the button OPEN to access the following submenu:
IRIS MANUAL SETUP
IRIS VAL
END
Select IRIS VAL and press the arrow buttons to change the iris opening and choose values from 1 to 100.
This adjustment must be changed only when the dome is used in extreme conditions. For all other
applications, it is suggested to use AUTO mode.
Select END and press CLOSE to go back to the previous menu.
SHUTTER – LENS
Select SHUTTER to choose between MANUAL and A.FLK options.
Select MANUAL and press the button OPEN to access the following submenu:
SHUTTER MANUAL SETUP
SHUTTER VAL
END
Press SET to Return
Select SHUTTER VAL and press the arrow buttons to change the lens opening and choose values from
"1/50" to "fix 2x".
Select END and press CLOSE to go back to the previous menu.
AGC – GAIN AUTOMATIC CONTROL
AGC is an electronic circuit which amplifies the video signal when this is under a certain threshold, i.e. the
image brightness is faint. The result is a sharper image in environments under faint lighting conditions and
where the same image would be dark without AGC.
Select AGC to choose among NORMAL, HIGH and OFF options.
SSNR – NOISE REDUCTION CIRCUIT
SSNR noise reduction technology (Samsung Super Noise Reduction) provides cleaner images without ghost
effect or motion blur, removing high levels of noise generated by low-light conditions.
Select SSNR and choose among LOW, MIDDLE , HIGH and OFF.
Note
This adjustment must be changed only when the dome is used in extreme conditions. For all other
applications, it is suggested to use OFF mode.
Select END and press CLOSE to go back to the previous menu.
DS1092-090
85 ■■■■■■■█■■■
1/50
72