urmet 1092/602 Bedienungsanleitung Seite 74

DAY/NIGHT – DOME OPERATION CHANGE ACCORDING TO VARIATION OF LIGHT PRESENT IN THE
SCENE
The dome usually captures colour images, but under low-light conditions it automatically switches its
operation mode from "colour" to "black/white". In this way the quality of the captured image is optimized.
Select DAY/NIGHT to choose among AUTO1 (automatic), AUTO2 (automatic), EXT, COLOR and B/W
(black/white) options.
AUTO1: This option allows the dome to change the automatic DAY/NIGHT switching function with a
minimum light change of 40LUX.
AUTO2: This option allows the dome to change the automatic DAY/NIGHT switching function with a
minimum light change of 20LUX.
EXT: FUNCTION NOT AVAILABLE AT THE MOMENT.
COLOR: With this option, the images captured by the dome are always in colour mode.
B/W: With this option, the images captured by the dome are always in black/white mode.
Select IMAGE ADJ and press OPEN to access the following submenu:
IMAGE SETUP
FREEZE
H-REV
V-REV
SHARPNESS
COLOR GAIN
END
Option
FREEZE
H-REV (MIRROR)
V-REV (MIRROR)
SHARPNESS
COLOR GAIN
END
SHARPNESS
Select SHARPNESS and press OPEN to access the following submenu:
SHARPNESS LEVEL
LEVEL
END
Press SET to Return
Select LEVEL and press the arrow buttons to change image sharpness, choosing values from 0 to 31.
Select END and press CLOSE to go back to the previous menu:
DS1092-090
OFF
OFF
OFF
ON
56 ■■■■■■■█■■■
Value
ON ÷OFF
ON ÷ OFF
/
ON ÷ OFF
0 ÷ 100
/
8 ■■■■■■■█■■■
IMAGE ADJ
Description
By selecting ON, the function "Still image
(Freeze)" is activated.
It allows to flip the image horizontally.
It allows to flip the image vertically.
Select ON to access the respective submenu
where to change
below).
It allows to adjust colour intensity of
images.
It allows to quit the sub menu.
74
image sharpness (see