urmet 1092/602 Bedienungsanleitung Seite 73

SENS-UP (DSS) – DOME SENSITIVITY ADJUSTMENT ACCORDING TO LIGHT CHANGE
This device allows to shoot scenes in low-light conditions. When the brightness gradually decreases, also the frame per
second is reduced (number of images/second), increasing the dome sensitivity.
Select SENS-UP to choose between AUTO (automatic) and OFF (disabled).
Select AUTO and press OPEN to access the following menu:
SENS-UP LIMIT SETUP
LIMIT
END
Press SET to Return
Select LIMIT and press the arrow buttons to change the exposure sensitivity of dome lens, selecting among
values from X2 to X128.
Select END and press CLOSE to go back to the previous menu.
10.5.7.6 Special– special adjustments
This function allows to change the functions concerning dome parameters.
Select this menu item and press the button OPEN to access the following sub menu:
SPECIAL SETUP
USER PRESET
PRIVACY
DAY/NIGHT
SYNC
COMM ADJ
IMAGE ADJ
END
Option
USER PRESET
PRIVACY
DAY/NIGHT
SYNC
COMM ADJ
IMAGE ADJ
END
DS1092-090
X2
OFF
OFF
AUTO1
INT
Value
FUNCTION NOT AVAILABLE AT THE MOMENT.
ON ÷ OFF
DO NOT USE.
FUNCTION NOT AVAILABLE AT THE MOMENT.
ON ÷ OFF
DO NOT USE.
COLOR ÷ B/W ÷ It allows to select the dome operation mode
AUTO1 ÷ AUTO2 ÷ changes according to use conditions (see
EXT below).
It indicates that the synchronization mode
INT
is internal and can not be changed.
In order to avoid loss of communication
/
between a dome and another one, DO NOT
CHANGE THIS PARAMETER.
Select this item to access the respective
/ submenu, where to select options concerning
image displaying modes (see below).
/ It allows to quit the submenu.
Description
DO NOT SELECT
73