Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
9.2.1
WALL MOUNTING
•
Before starting installation, check that all devices to be connected are not powered.
•
Place on the wall mounting bracket the provided o-ring, in the suitable seat.
•
Fit the dome connection cable, provided, into the bracket, until it comes out on the opposite side.
•
Put the provided junction ring in the upper seat of the dome, taking care that the three holes on the
dome match the three holes on the ring, using the references on both the sides.
•
Connect the cable terminal block to the dome terminal block, as shown in the figure.
DS1092-090
52
Werbung
Kapitel
Inhaltsverzeichnis
