Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
10.5.3
Settings of main programming procedures via the menu (Control Options)
From the first level menu, select <CONTROL OPTIONS> and its submenus to access the main menus for
programming THERA 5.
Option
Auto Flip
Proportional Speed
Pan Riverse
Tilt Riverse
VectorScan Still
Auto Focus
Auto AE
VectorScan AF
+2 Tilt Limit
Speed limit
DS1092-090
>1 Auto Flip ON
2 Proportional Speed ON
3 Pan Reverse OFF
4 Tilt Reverse OFF
5 Vector Scan Still OFF
6 Auto Focus PTZ
7 Auto AE PTZ
8 VectorScan AF ON
9 +2 Tilt Limit OFF
10 Speed limit OFF
IRIS CLOSE to Exit
Value
On/off
ON/OFF
ON/OFF
ON/OFF
ON/OFF
ON/OFF/PTZ/Z
ON/OFF/PTZ/Z
ON/OFF
ON/OFF
ON/OFF
CONTROL OPTIONS
Description
If this mode is active (ON), the dome can follow the trajectory of
an object that moves and goes under the dome, only with the
vertical movement of the joystick. This because the dome, when in
vertical position, performs an automatic pan movement of 180
degrees in order to reach a position where the tilt movements are
again possible.
If this mode is active (ON), pan and tilt speed, configured with the
keypad, is proportional to the configured zoom. Therefore the
motion speed is reduced when the zoom increases.
If this mode is active (ON), joystick commands for pan function are
reversed.
If this mode is active (ON), joystick commands for tilt function are
reversed.
FUNCTION NOT ENABLED
If activated with ON, the dome will automatically control the image
focus. If activated with PTZ, the dome will focus images only when
using Pan, Tilt and Zoom functions. If activated with Z, the dome
will focus images only when using the zoom function.
If activated with ON, the dome will automatically control the image
exposure. If activated with PTZ, the dome will perform this control
only when using Pan, Tilt and Zoom functions. If activated with Z,
the dome will perform this control only when using the zoom
function.
FUNCTION NOT ENABLED
If activated with ON, the limit of dome tilt will increase of 2
degrees, changing from 0° to -2°.
If activated with ON , this function halves the previously configured
dome speed.
65
Werbung
Kapitel
Inhaltsverzeichnis
