Main Setup - urmet 1092/602 Bedienungsanleitung

10.5.4 SETTINGS OF MAIN PROGRAMMING VIA THE MENU (DIAGNOSTIC OPTIONS)
From the first level menu, select <DIAGNOSTIC OPTIONS> and its submenus to access the main menus for
THERA 5 management and diagnostics.
Option
Clear Memory
Restore Def Setting
Color System
Dome Reset
10.5.5 SETTINGS OF SECONDARY PROGRAMMING VIA THE MENU (CAMERA OPTIONS)
From the first level menu, select <CAMERA OPTIONS> and its submenus to access camera menus for
programming the camera module.
10.5.6 MENU STRUCTURE DESCRIPTION
After the command to access the menu has been entered, the display will show the first screen of the
camera module OSD menu.
Use the arrow buttons
Once the desired item has been selected, the parameter can be changed with the button
the available options, which can be displayed by pressing repeatedly the button
To confirm settings, select END and press the button CLOSE.
Select the item with the symbol
CAM TITLE
WHITE BAL
BACKLIGHT
MOTION DET
FOCUS
EXPOSURE
SPECIAL
RESET
END
DS1092-090
>1 Clear Memory
2 Restore Def Setting
3 Color System
4 Dome Reset
IRIS CLOSE to Exit
Value
PAL/NTSC
or to select the items.
to access a next submenu, where further changes can be performed.

MAIN SETUP

ON
ATW
LOW
ON
Diagnostic Options
PAL
Description
If the function is activated with the button OPEN and the button
OPEN is pressed again to confirm, all the stored user Preset and
VectorScan Still are deleted (all customizations configured by the
user for Dome usage are excluded from deletion).
If activated, it restores all Dome default data, except data stored
by the user concerning presets and VectorScan Still.
Use only PAL system.
It performs a REBOOT of the device, without loosing the user
configurations. The Dome goes back to its default position.
66
choosing among
.