Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
•
Fix the bracket to the dome using the provided round head screws with the rubber washer, by screwing
them tightly in the holes on the bracket sides.
•
Fix the dome to the wall, taking care that the cable goes through the slot in the bracket, or make another
hole on the wall, in order to allow the passage of the cable. The diameter of this hole must be large
enough for the passage of the connectorized cable.
•
Fix tightly the dome to the wall, using the 4 holes in the bracket base, with 4 M6 screws, not provided.
The following figure shows the hole interaxis in mm.
DS1092-090
70
50
No. 4 holes ∅ 8
53
Werbung
Kapitel
Inhaltsverzeichnis
