Display Options - urmet 1092/602 Bedienungsanleitung

Option
Language
Dome Information
Display Informations
Control Options
Diagnostic Options
Camera Options
Function Programming
10.5.1 PRODUCT INFORMATION MENU
Select <DOME INFORMATION> from the first level menu to have information about module, protocol, baud
rate, dome address, version.
This information can not be changed in this menu.

10.5.2 Display options

The menu <DISPLAY OPTIONS> allows to enable/disable the messages which must appear in THERA 5
functions.
Option
COORDINATES
START-UP SCR MSG
DS1092-090
Value
ENGLISH
Dome Information
Camera
Protocol
Baudrate
Dome NO
Version
IRIS CLOSE to Exit
Coordinates
Start-Up Scr Msg ON
IRIS CLOSE To Exit
Value
ON/OFF
ON/OFF
Description
Menus are only in English.
Product information menu (see par. 4.5.1 ).
Display menu (see par. 4.5.2 ).
Main programming menu (see par. 4.5.3 ).
Secondary programming menu (see par. 4.5.4 ).
Menu used to configure the text associated to the dome (see par.
4.5.5 ).
Menu concerning Preset, Vector Scan, Pattern, Motion and
Alarms programming and storing procedures(see par. 4.5.8 ).
SAMSUNG
Pelco D
9600
3
X.XX
Display Options
ON
Description
Display of pan/tilt coordinates of shown images enabled/disabled.
Display of product information at dome power-up enabled/disabled
(see par. 4.5.1 ).
64