urmet 1092/602 Bedienungsanleitung Seite 67

Option
CAM TITLE
WHITE BAL
BACKLIGHT
MOTION DET
FOCUS
EXPOSURE
SPECIAL
RESET
END
10.5.7 MENU ITEMS DESCRIPTION
10.5.7.1 Cam title – assigning a name to the dome
This function allows to give a name to the dome and display this name in the desired position.
Select this menu item to choose between ON and OFF options.
Select ON and press the button OPEN to access the following submenu, where to give a name to the dome.
ABCDEFGHIJKLMNO
PQRSTUVWXYZabcd
efghijklmnopqrs
tuvwxyz01234567
89 ()<>-/#*!?,.
Use "arrow" buttons to move on the desired character.
Press the button OPEN to confirm it.
Press CLR to delete the selected characters.
To delete only one or more characters, move with the "arrow" buttons on the "blank character" in the position
after the number 9 and before the symbol (
and press OPEN.
Select POS and press OPEN to access the following submenu:
CAM TITLE POS SETUP
Use the "arrow" buttons to define the position on the screen, where the dome name will be displayed.
Press CLOSE to go back to the previous menu.
Select END and press CLOSE to go back to the previous menu.
DS1092-090
Value
ON ÷ OFF
MANUAL ÷ AWC-SET
÷ ATW
÷
LOW MIDDLE
HIGH ÷ OFF
ON ÷ OFF
/
/
/
/
/
CLR POS END
to Locate, then SET
Description
This option allows to give a name to the
dome, using up to 20 characters max. (see
below).
This option allows
balancing mode (see below).
÷
This option allows to select the level of
backlight compensation (see below).
SELECT ONLY OFF (to configure the Motion
Detector function, use the function in the
main menu Function Programming).
This option allows to select the parameters
concerning dome zoom operation (see below).
This option allows to adjust lens exposure
(see below).
This option allows
functions (see below).
This option allows to delete all changes
performed by the user; the dome is reset to
its initial state.
This option allows to quit the main menu
and go back to the OSD menu.
67
to select the white
to activate special