struers Discotom-50 Gebrauchsanweisung Seite 11

Front Panel Controls
Name Key
MAIN
SWITCH
Power
POWER
INDICATOR
s
START
o
STOP
Auto
AUTO
Auto
AUTO
INDICATOR
Discotom-50
Instruction Manual
Function
The main power switch is
located on the right hand
side of Discotom-50. Turn
clockwise to switch on the
power.
Lights when main power is
switched on.
Starts the machine. The cut-
off wheel starts rotating and
the cooling water is turned
on.
Stops the machine. The cut-
off wheel stops rotating and
the cooling water is turned
off.
Select or deselect automatic
cutting mode
Lights when automatic
cutting mode selected.
Name Key
v
FORWARDS
V
BACKWARDS
FEED SPEED
FEED SPEED
REDUCED
1
ROTATIONAL
SPEED
2
LOAD BAR
Reflects the present motor load status.
3
EMERGENCY
STOP
4
o
EMERG. STOP
OVERLOAD
Function
Moves cutting table
forwards.
Moves cutting table
backwards.
Regulates the feed speed of
the cutting table. The speed
can be set from 0.1-2.5
mm/sec.
Lights when the feed speed
has been set too high and is
reduced by the machine.
Regulates the rotational
speed of the cut-off
wheel. The speed can be
set from 1000-3000 rpm.
Push the red button to stop.
Pull the red button to release.
Lights when emergency stop
has been pressed or the
cutting motor is overloaded.
7