Disposal And Recycling; Troubleshooting - Scheppach HS81S Original Bedienungsanleitung

Connections and repairs of electrical equipment may
only be carried out by an electrician.
Please provide the following information in the event
of any enquiries:
Type of current for the motor
• Motor data - type plate
• Machine data - type plate

15. Disposal and recycling

The equipment is supplied in packaging to prevent it
from being damaged in transit. The raw materials in
this packaging can be reused or recycled. The equip-
ment and its accessories are made of various types
of material, such as metal and plastic. Defective
components must be disposed of as special waste.
Ask your dealer or your local council.
Old devices must not be disposed of with house-
hold waste!
This symbol indicates that this product must
not be disposed of together with domestic
waste in compliance with the Directive
(2012/19/EU) pertaining to waste electrical
and electronic equipment (WEEE). This product must
be disposed of at a designated collection point. This
can occur, for example, by handing it in at an author-
ised collecting point for the recycling of waste elec-
trical and electronic equipment. Improper handling
of waste equipment may have negative consequenc-
es for the environment and human health due to po-
tentially hazardous substances that are often con-
tained in electrical and electronic equipment.

16. Troubleshooting

Problem Possible Cause
Saw blade gets loose af- • Fastening nut tightened insufficiently
ter turning off the motor
Motor does not start • Failure of mains fuse
• Extension cable defect
• Connections on the motor or switch defect
• Motor or switch defective
Motor wrong direction of • Capacitor defective
rotation • incorrect connection
No motor output turns • Cross-section of the extension line is insuf-
off automatically
• Overload by dull saw blade,
Burns on the cutting • Blunt saw blade
surface • wrong saw blade
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
ficient
By properly disposing of this product, you are also
contributing to the effective use of natural resources.
You can obtain information on collection points for
waste equipment from your municipal administration,
public waste disposal authority, an authorised body
for the disposal of waste electrical and electronic
equipment or your waste disposal company.
Help
• Tighten fastening nut, left-handed thread
• Check the mains fuse.
• See "Electrical Connection" in the operat-
ing manual
• Have it checked by an electrician
• Have it checked by an electrician
• Have it checked by an electrician
• Have electrician exchange the polarity of
the wall socket
• see Electrical connection
• Change saw blade
• Sharpen saw blade, replace
• Replace saw blade
GB | 35