Endress+Hauser t-mass I 300-digital Einbauanleitung Seite 24

EA01288D
12.6 Installing the retractable assembly
1 →
1.
2.
‣
Turn the hexagonal bolt
counterclockwise (1) and move
the arm of the retractable
assembly down (2).
4 →
1.
6 mm
12 Nm
2.
‣
For t-mass 300: Mount the
retractable assembly on the
sensor connection (1), close the
lower U-bolt (2).
24
2 →
19 mm
1.
‣
Release the screws (1), remove
the U-bolts (2).
5 →
6 mm
12 Nm
2.
‣
For t-mass 500-digital: Mount
the retractable assembly on the
sensor connection (1), close the
lower U-bolt (2).
6 mm
2.
1.
3 →
6 mm
‣
Secure the screws on the
retractable assembly with an
adhesive if the retractable
assembly is a fixed installation
assembly and exposed to strong
vibrations.
6 →
1.
2.
‣
For t-mass 300: Turn the
hexagonal bolt clockwise (1) and
move the arm of the retractable
assembly up (2).
Endress+Hauser
19 mm