Endress+Hauser t-mass I 300-digital Einbauanleitung Seite 22

EA01288D
12.4 Installing the measuring device
CAUTION
L
Danger of leaks!
‣
Use suitable sealing material.
1 →
1.
3 mm 6
‣
t-mass 300: Loosen the coupling
nut (1) and push the coupling
down (2) so that the sensor is not
damaged when the coupling is
screwed into the sensor
connection.
1 →
‣
t-mass 300: Tighten the coupling
nut by hand.
22
2
1.
2.
3 mm 6
‣
t-mass 500-digital: Loosen the
coupling nut (1) and push the
coupling down (2) so that the
sensor is not damaged when the
coupling is screwed into the
sensor connection.
2 →
‣
t-mass 500-digital: Tighten the
coupling nut by hand.
2.
Endress+Hauser