8.4
Installing the measuring device
CAUTION
L
Danger of leaks!
‣
Use suitable sealing material.
1 →
1.
3 mm
6
‣
t-mass 300: Loosen the coupling
nut (1) and push the coupling
down (2) so that the sensor is not
damaged when the coupling is
screwed into the sensor
connection.
4 →
‣
t-mass 500-digital: Tighten the
coupling nut by hand.
Endress+Hauser
2 →
1.
2.
3 mm
6
‣
t-mass 500-digital: Loosen the
coupling nut (1) and push the
coupling down (2) so that the
sensor is not damaged when the
coupling is screwed into the
sensor connection.
5 →
‣
Close the ball valve (1), insert the sensor (2). In doing so, do not rest the
sensor tip on the ball valve.
3 →
2.
‣
t-mass 300: Tighten the coupling
nut by hand.
1.
2.
EA01288D
11