(17)
(18)
8. Select the desired suction nozzle, e.g. the
floor nozzle (18), and insert it into the tele-
scopic tube (17).
You can also insert all nozzles and the
2-in-1 tool (19) directly onto the han-
dle (12).
The length of the telescopic tube can be ad-
justed to suit your height.
• To do so, press the locking button (38)
down and slide the telescopic tube either
apart or together.
After the locking button (38) is released,
the telescopic tube engages in the next
notch with a click.
Setting up remote control
The remote control allows you to control the
vacuum cleaner with the handle.
1. Use your foot to operate the on/off foot
switch (6), to switch the appliance on.
2. Press and hold the
buttons on the control panel (5) simulta-
neously for 5–8 seconds.
The 6 suction force indicators (23) flash.
(38)
(12)
(26)
3. Press the
dle (12), in order to establish the connec-
tion
The 6 suction force indicators (23) disap-
pear. The set-up is completed.
If setting up the remote control did not
work, please repeat the steps.
Page EN-13
Start-up
MIN
(25)
(24)
MAX
(24) and
(26) button on the han-
(6)
(23)
(25)