Using as an upholstery nozzle
(20)
1. Insert the crevice nozzle (21) on the fur-
niture brush end (30) of the combi noz-
zle (20).
2. Attach this combination to the telescopic
tube (17) or directly to the handle (12).
Device components/operating elements
Storing the 2-in-1 tool
When you don't need the 2-in-1 tool, you can
(30)
(21)
store it inside the appliance itself.
1. Press the opening button (2) for the stor-
2. Store the assembled 2-in-1 tool (19) in
3. Close the cover (3) again.
(19)
(2)
age compartment for the 2-in-1 tool (19).
The cover (3) folds up.
the storage compartment.
Page EN-11
(3)