Connect Pc To The Same Network With Smart Board; Opening Web Configuration Interface With Browser - VESTEL EVC04 Serie Installationsanleitung

4.1 - CONNECT PC TO THE SAME NETWORK WITH SMART BOARD

In order to access web configuration interface, first you need to connect your PC and EV charger
to the same ethernet switch or connect EV charger to your PC directly.
Default IP address of HMI board is 192.168.0.10. For this reason, you need to give static IP to your
PC in the same network with HMI board.
You should assign static IP address to your PC in 192.168.0.254 network which means that IP
address should be in a range of between 192.168.0.1 and 192.168.0.254.

4.2 - OPENING WEB CONFIGURATION INTERFACE WITH BROWSER

Open your web browser and type 192.168.0.10 which is IP address of smart board.
You will see login page on your browser;
When you want to enter to the web configuration interface in the first time, you will see the warning
as "We recommend you to change your default password from system maintenance menu".
You can enter the system with:
Default username = admin
Default password = eon01
You can change password with Change Password Button in login page or Administration Password
section in the System Maintanence tab.
IG v7.3.0 2021
Figure.30
Figure.31
© 2021 Vestel - All rights reserved English - 36