Ocpp Connection; Connect Ocpp Over Cellular Network (Optional); Connect Ocpp Over Ethernet - VESTEL EVC04 Serie Installationsanleitung

3 - OCPP CONNECTION

Make sure the charging station is powered-off.

3.1 - CONNECT OCPP OVER CELLULAR NETWORK (Optional)

Insert the micro SIM card in the SIM card slot on cellular module as shown in the below figure.

3.2 - CONNECT OCPP OVER ETHERNET

1- Insert cable through the cable gland. See
section "2.6.1 Data Cable Connection"
instructions, 1 and 2.
3- Using a Crimping Tool, trim the end of the
cable you're terminating, to ensure that the
ends of the conducting wires are even.
IG v7.3.0 2021
Figure-29
2- Pull the cable through the cable clamps as
indicated by arrows in below figure.
4- Strip off approximately 1 inch of the cable's
jacket, using a modular crimping tool or a
UTP cable stripper.
© 2021 Vestel - All rights reserved
CN1
English - 33