Change Network Interfaces Settings Of The Device - VESTEL EVC04 Serie Installationsanleitung

Please be careful for your entered values because the system does not accept the unsuitable values
and gives the warning. In this case, values will not be saved. Then the
page does not to be redirected the main page so you should check your values.
Also if you make changes and you don't save them before the leaving that page, you will see the
warning as shown below.

6.4 - CHANGE NETWORK INTERFACES SETTINGS OF THE DEVICE

There are three types of network interfaces in this page; Cellular, Ethernet and Wi-Fi.
Select interfaces' modes as "Enabled" if you want to activate it.
If you select Ethernet or Wi-Fi IP Settings as "Static"; "IP Address", "Network Mask", Default
Gateway" and "Primary DNS" spaces are mandatory.
If you set Wi-Fi as enabled, "SSID", "Password" and "Security" are mandatory.
You should fill all spaces in suitable formats.
IG v7.3.0 2021
Figure.44
Figure.45
© 2021 Vestel - All rights reserved English - 44