Change General Settings Of The Device; Display Language - VESTEL EVC04 Serie Installationsanleitung

to the local list, the charging station switches to RFID local authorization mode and plug&charge
mode is disabled. It is possible to switch back to plug&charge mode by deleting all user RFID cards
from local list or reseting local RFID card list mentioned in section 2.10.
c.WLAN: This preset is available for both Standalone and E.on Auto-detect products as mentioned
in table.2. In WLAN preset, the charging station is configured to use WLAN interface to connect to
the OCPP central system via open internet link. WLAN configurations such as SSID and password
should be done by the technician during installation from web configuration interface (which is
described in section 4.7. The charging station is preconfigured as plug&charge by default. To
disable plug&charge mode (VestelFreeMode) and activate RFID authorization, it is needed to change
FreeModeActive OCPP configuration key to "false" either from OCPP central system or from web
configuration interface in "OCPP Settings" menu.
d.LAN-WAN: This preset is available for both Standalone and E.on Auto-detect products as
mentioned in table.2. In LAN-WAN preset, the charging station is configured to use LAN interface
to connect to the OCPP central system via open internet link. The charging station is preconfigured
as plug&charge by default. To disable plug&charge mode (VestelFreeMode) and activate RFID
authorization, it is needed to change FreeModeActive OCPP configuration key to "false" either from
OCPP central system or from web configuration interface in "OCPP Settings" menu.
e.LAN-APN: This preset is only available for Standalone products as mentioned in table in section
5.2. In LAN-APN preset, the charging station is configured to use LAN interface to connect to the
OCPP central system via VPN link. The charging station is preconfigured as plug&charge by default.
To disable plug&charge mode (VestelFreeMode) and activate RFID authorization, it is needed to
change FreeModeActive OCPP configuration key to "false" either from OCPP central system or
from web configuration interface in "OCPP Settings" menü.
NOTE : After the selection of related preset the configuration should be saved.

6.2 - CHANGE GENERAL SETTINGS OF THE DEVICE

6.2.1 - Display Language:

page. Available languages for display language are as shown in figure below for now. After
selecting the language, user can save selection by "Save Button".
IG v7.3.0 2021
Technician can select display language from the general settings
Figure.39
© 2021 Vestel - All rights reserved English - 41