5- Product Variants; Default Setting "Standalone; Default Setting "E.on Auto-Detect - VESTEL EVC04 Serie Installationsanleitung

5- PRODUCT VARIANTS

There are two main product variants which differs in their Pre-Sets.

5.1 - Default Setting "Standalone"

EVC04-E11-W-S
EVC04-E11-W-C
Default factory preset is "Standalone". Preset availibility and selections are shown in figure 34 for
Standalone product family.
Pre-set automatically selected : Standalone
Master card registered

5.2 - Default Setting "E.ON Auto-detect"

The product models and general features are as shown in table below:
EVC04-E11-WDM-S
EVC04-E11-WDM-C
EVC04-E22-WLDM-S
EVC04-E22-WLDM-C
EVC04-E22-WLPDM-S
EVC04-E22-WLPDM-C
Default factory preset is "E.ON auto-detect". Preset availibility and selections are shown in figure
35 for E.ON Auto-detect product family.
IG v7.3.0 2021
Wallbox
No connection
Standalone
only
x x
x x
x x
x x
© 2021 Vestel - All rights reserved
x x
x x
Pre-sets which can be manually selected
Select
Standalone
Connect
Figure-34
x x x x
x x x x
x x x x
x x x x
x x x x
x x x x
x
5m
Wallbox
Connect with laptop
though LAN to the
local Web UI
Select WLAN Select LAN_WAN
pre-set
Connect Connect
x
5m
x
7m
x x
x 7m
x x
x x
Select
pre-set LAN_APN
Connect
x
x
x
x
x
x
English - 38