Change Ocpp Settings Of The Device - VESTEL EVC04 Serie Installationsanleitung

6.3 - CHANGE OCPP SETTINGS OF THE DEVICE

OCPP Connection
If you select mode as "Enabled"; you should type all fields in the connection settings and
configuration parameters sections are enable in the below.
For now, the only available OCPP version is OCPP 1.6, so it will be selected as default.
The Central System Address and Charge Point Id are mandotary fields for saving this page.
You can set OCPP configuration parameters to their default values by clicking "Set to Defaults"
button.
You can select the OCPP settings type you want from the menu which is at the left side of the page.
For example OCPP Connection,OCPP Version,Connection Settings and OCPP
Configuration Parameters.
Then, click "Save" button.
IG v7.3.0 2021
Figure.42
Figure.43
© 2021 Vestel - All rights reserved English - 43