Locked Cable Function (Model With Socket) - VESTEL EVC04 Serie Installationsanleitung

2.6.3 - LOCKED CABLE FUNCTION (Model with Socket)

This charging station has functionality for fixing the charging cable of the user, to the charging
socket of the unit. The cable becomes locked and socket model charging station behaves as a
cabled model. For this functionality, the steps in table-11 can be followed.
1- Turn off the power of your charging station.
3- To enable locked cable function, toggle DIP switch
pin 3 to ON position using pointed spudger or a
plastic pointed tool. The DIP switch location is as
shown in below figure.
5- Open the front cover of the socket outlet and plug
the charging cable to the socket outlet.
IG v7.3.0 2021
Disabled Enabled
2
3
© 2021 Vestel - All rights reserved
2- Open the product cover as described in the
installation manual.
4- Close the product cover as described in the
installation manual.
6- Turn on the power to your charging station. The
cable becomes locked and the charging station starts
behaving as a cable model.
Table-11
English - 25