VESTEL EVC04 Serie Installationsanleitung Seite 14

RJ45 Male Connector –
Optional
Mounting Template
O-Ring
Screw M6X20
Screw M6X30
IP Rubber
User RFID Card
Master RFID Card
Installation Guide
Instruction Book
IG v7.3.0 2021
LAN Cable connection
Mounting the charging station to the wall
Mounting the charging station to the pole
Mounting the charging station to the pole
Mounting and providing earth continuity
for the charger, that mounts to metal
surface. This screw should be mounted to
the right-down hole of charging station to
the Wall. Below this screw, there should
be rubber under it to fix the ground cable.
Fixing the ground cable with the screw
M6x30. This rubber should be placed to
right-down Wall mount hole of charging
station, under the ground cable and screw
M6x30
Start&Stop Charging
Adding&Removing the User RFID Cards
to Local RFID List
Installation Manual
User Manual
Table-3
© 2021 Vestel - All rights reserved
1
1
3
3
1
1
2
1
1 Set
ELECTRIC VEHICLE CHARGER
EVC04 Series
1 Set
ELECTRIC VEHICLE CHARGER
EVC04 Series
English - 13