Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

6. Laundry which cannot be spaced is
in the drum.
If the appliance has a malfunction not noted on the schedule above or if you
have checked all items on the above schedule but the problem still exists, please
contact the aftersales service.

8.2 Error codes

E
RROR CODE
1. Water tap closed.
F 01
2. Water pressure too low.
Problems with
3. Water inlet hose is frozen.
the water
4. Filter is blocked.
inlet.
1. The
F 03
Problems with
the water
2. Water drain hose was
outlet.
3. Water drain hose is frozen. 3. Defrost the water drain hose.
4. Water
5. Water discharge is blocked. 5. Remove the blockage and
6. Drain
1. Door opening alarm.
F 14
P
OSSIBLE CAUSE
« S
P
» - button is pressed
AUSE
and the programme is
paused.
installed too high.
drain
blocked.
pump
blocked.
~
6. Remove the pieces which cannot be
spaced.
(
)
S
1. Open the water tap.
2. Wait some time.
3. Defrost the water inlet hose.
4. Remove the filters and clean
them.
/
1. Press
TART
/ P
reactivate
programme.
Press the « O
switch off the appliance. After at
least 3 seconds press the
« O
/O
N
the appliance. After Set the
programme « S
Speed = 0) to drain the water.
2. Max. height 125 cm.
hose
is
4. Remove the blockage and
clean the hose.
clean the water discharge.
filter
is
6. Remove the drain pump
filter and clean it.
1. Press the « S
-
BUTTON
tries to open the door. The
error code remains until the
door lock is deactivated. Or
Press
~
146
M
(
)
EASURE
S
« S
» - button again to
AUSE
the
O
R
/O
» button to
N
FF
» button, to turn on
FF
» (and Spin
PIN
/ P
TART
The
appliance
the
« O
N
TART
set
»
AUSE
/O
»
FF

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis