Error Codes - Pkm WA6-ES1015D Bedienungsanleitung

8.2 Error codes

E
RROR CODE
1. Water tap closed.
F 01
2. Water pressure too low.
Problems with
3. Water inlet hose is frozen.
the water
4. Filter is blocked.
inlet.
1. The
2. Water drain
F 03
Problems with
3. Water drain hose is frozen. 3. Defrost the water drain hose.
the water
4. Water
outlet.
5. Water discharge is blocked. 5. Remove the blockage and
6. Drain
1. Failure of the electronic
F 04 / F 05
F 06 / F 07
F 23
The display
indicates one
of the error
codes above.
P
OSSIBLE CAUSE
« S
P » - button is pressed
AUSE
and the programme is
paused.
hose was
installed too high.
drain
blocked.
pump
blocked.
module.
~
( )
S
1. Open the water tap.
2. Wait some time.
3. Defrost the water inlet hose.
4. Remove the filters and clean
them.
/ 1. Press
TART
/ P
reactivate
programme.
2. Max. height 125 cm.
hose is 4. Remove the blockage and
clean the hose.
clean the water discharge.
filter is 6. Remove the drain pump
filter and clean it.
1. Turn the rotary knob to
position « O
seconds to switch off the
appliance. Set a program; e.g.
« S
PIN
no longer indicates an error
code, press the « S
/ P
the programme.
If the problem cannot be
solved,
unplug the appliance, close
the water tap and contact the
aftersales service.
~
126
M ( )
EASURE S
« S
» - button again to
AUSE
the
» for at least 3
FF
». When the display
» -
AUSE BUTTON
switch off
TART
set
TART
to start
and