Error Codes - Pkm WA 8.5-E1614 Bedienungsanleitung

6.2 Error codes

1. The proper water level has not been
reached within a certain period of
time.
1. The water is not drained completely
within a certain period of time.
1. The door is not closed properly.
2. Defective door lock.
1. Overflow occurs.
1. The electrical motor of the appliance
has malfunctioned.
1. The heater is inoperative.
1. Malfunction of the temperature
sensor.
1. Communication error.
Downloaded from www.Manualslib.com
Code
Cause(s)
E 1
E 2
E 3
E 4
E 5
E 6
E 7
E 9
manuals search engine
Meaning
Strategy
Water supply error.
 Check
the water
opened?); otherwise contact the
aftersales service.
 Check the water pressure. Is it too
low?
 Check if the water inlet hose is
blocked.
 Otherwise please
aftersales service.
Water drain error.
1. Check if the drain pump is blocked.
 Otherwise
please
aftersales service.
Door lock error.
1. Close the door properly.
2. Please contact
service.
Overflow.
1. If E 4 is displayed, the drain pump is
running to drain
automatically.
 Please
contact
service!
Failure of the motor.
1. Please contact
service!
Heater error.
1. Please contact
service!
Temperature sensor error.
1. Please contact
service!
Communication error.
1. Please contact
service!
88
supply (tap
contact your
contact your
your aftersales
the water
your aftersales
your aftersales
your aftersales
your aftersales
your aftersales