Herunterladen Inhalt Inhalt Diese Seite drucken

Flowair ECM Installation, Gebrauch Und Wartung Seite 106

Wand-gebläse-konvektoren
Inhaltsverzeichnis

Werbung

Fig. "F" / Abb. "F" / Рис. "F"
> 2 sec.
ТАЙМЕР
1) Включение / Выключение
(Рис. "F"):
• Нажать кнопку "M";
на экране появится
символ рабочего режима.
• Нажать кнопку (+) или (-),
пока не появится
символ часов "
";
подтвердить нажатием кнопки "М".
• Нажать кнопку "М",
чтобы войти в меню
включения/выключения.
• По умолчанию
ТАЙМЕР находится
в режиме OFF (ВЫКЛ);
использовать
кнопки (+) или (-) для
выбора между TIMER OFF
(таймер выключен) или
TIMER ON (таймер
включен).
• Нажать и удерживать
кнопку "М" на протяжении
2 секунд, чтобы вернуться
к рабочему режиму.
54
TIMER
1) Activation / Deactivation
(Fig. "F"):
• Press the "M" button;
the operation mode
symbol will start flashing.
• Press button (+) or (-),
until selecting
the watch symbol "
";
confirm using the "M" button.
• Press the "M" button
to access to
the activation/deactivation.
• The default TIMER
is in OFF position;
use buttons (+) or (-)
to select
TIMER OFF (deactivated)
or TIMER ON (activated).
• Press the "M" button
for more than 2 seconds
to turn back
to the operation mode.

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Ecm–tEcm–mb

Inhaltsverzeichnis