Checchi & Magli PLASTIC-STOP PLUS Bedienungs- Und Wartungsanleitung Seite 70

Reinforced frame kit
The reinforced frame kit is suitable for coupling the work
vehicle to WOLF/3 and WOLF/4 planting machines.
- Removing the standard frame
To remove the standard frame, proceed as outlined be-
low.
1) Remove all the components mounted on the stand-
ard frame (compacting roller, front support wheels,
mulch sheet roll brake, etc.)
2) Undo the screws (A) on both sides of the work vehi-
cle.
3) Remove the standard frame (B).
- Reinforced frame kit assembly
To fit the reinforced frame, proceed as outlined below.
1) Position the reinforced frame (1).
2) Position the brackets (2) and (3) as shown in the fig-
ure.
3) Tighten the screws (4).
4) Tighten the screws (5).
English language
ENCLOSURES
Danger - Warning
Only ever couple the mulching machine to the plant-
ing machines envisaged by the manufacturer (see
"Technical specifications - Planting machines that
can be coupled to the machine").
A
B
UN41-0266AI
2
5
3
UN41 0267AI
30
A
4
1
Use and maintenance
A